Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Round Rock
Furnace repair in Round Rock typically runs between $150 and $700, and for most fixes our techs complete the job the same day we arrive. That range covers everything from a $150 – $280 ignitor replacement to a $500 – $700 blower motor or gas valve job. If your furnace is short cycling, blowing cold air, or making a noise it never made before, call us at (361) 204-1605 and we’ll send a background-checked tech to your door with a written price in hand before any tool comes out.
We know Round Rock’s particular housing mix because we work in it every week. Older 1980s tract homes off Mays Street, newer builds in Teravista, and everything in between. Each one fails differently. Knowing which one you’re in tells us what to look for first.
Why Cold Harbour Heating and Air Austin Is Round Rock’s Preferred Furnace Repair Company
Cold Harbour Heating and Air has been fixing furnaces across Round Rock since 2003, and we’ve built our local reputation on one simple habit: we write down the price before the work starts, and we write down the guarantee before we leave. No verbal promises. No “trust me.” The 365-Day Done Right Promise goes on paper every time, and it means exactly what it says: if the repair fails inside a year, we come back and fix it at no charge. That’s not a policy we apply case by case. It’s how every job works.
Victor Mancini, who leads our team, insists every tech carry printed guarantee forms on the truck. It’s the Kingswell Way: say the price before the work, show up in the window given, leave the place cleaner than found, put the guarantee in writing, come back if it fails. We’re independently owned and operated as part of the Kingswell network, so we answer to Round Rock homeowners directly, not to a corporate office in another state.
When you call about a furnace that quit on a cold January morning, you get a live person on the phone, 24 hours a day, every day of the year. Not a voicemail tree. You’ll know the tech’s name before they ring your doorbell, and they’ll be wearing a Cold Harbour uniform with ID. Our dispatch is coordinated out of our Austin office, but the crews live and work locally in the Round Rock area, so response times to neighborhoods like Brushy Creek, Egger Acres, and Forest Creek run fast even on busy days.
Styles & brands we work with







Furnace Maintenance in Round Rock
Furnace Maintenance in Round Rock is the cheapest insurance you can buy against a dead furnace on the coldest night of the year, and it runs $80 – $200 for a full tune-up. A proper maintenance visit includes checking the heat exchanger for cracks, testing the ignitor and flame sensor, measuring gas pressure, inspecting the flue for proper venting, and cleaning the blower assembly. In Round Rock’s climate, where furnaces sit idle for eight months and then work hard through December and January, dust builds up and moving parts stiffen. A $120 tune-up catches what a $650 emergency repair becomes three weeks later.
Burner and Flame Sensor Cleaning
Central Texas air carries fine dust and pollen that settles inside the burner assembly during the off-season. When the flame sensor gets coated, the furnace fires and then shuts down immediately because it can’t confirm ignition. It’s one of the most common no-heat calls we get in Round Rock during the first cold snap of the year. A tune-up includes removing and cleaning that sensor, so you don’t find out it’s dirty at 6 AM on a 28-degree morning.
Heat Exchanger Inspection
In 1980s and 1990s Round Rock tract homes, we regularly find original heat exchangers with hairline cracks from decades of thermal cycling. A cracked heat exchanger can leak carbon monoxide into the home, which is why we inspect it visually with an inspection camera during every maintenance visit. We don’t give DIY advice on this one. If we find a crack, we’ll show you the photo and recommend replacement before you run the furnace again.
Heat Pump Repair in Round Rock
Heat Pump Repair in Round Rock matters because a large share of newer homes in master-planned communities like Teravista and Paloma Lake run all-electric heat pumps instead of gas furnaces. When a defrost board fails during a cold snap, you lose all heating at once, with no gas backup to fall back on. Heat pump repairs in Round Rock fall inside the same $150 – $700 range as furnace repairs, with defrost board replacements typically running $250 – $450 and reversing valve work on the higher end. If your heat pump is blowing cold air while in heat mode, or icing over completely, call us before the emergency gets worse.
Defrost Board and Thermostat Recalibration
We’ve had multiple Round Rock calls in the last two winters where an all-electric home lost heat because the defrost board failed silently. The homeowner wakes up to a cold house and assumes the unit is dead. Often it’s a board replacement and a thermostat recalibration, but that’s not something a homeowner should be opening up the unit to diagnose. High-voltage connections and refrigerant pressures are involved. Our tech carries common defrost boards for Carrier, Bryant, and Daikin units on the truck, which gets your heat back on faster.
Heat Pump Airflow Problems in Newer Builds
Newer Round Rock homes present a specific failure pattern we see again and again. Builder-grade flex duct sags in hot attics over the first two or three summers, kinking and restricting airflow until the limit switch trips and the system locks out. A homeowner in a five-year-old house shouldn’t be replacing a blower motor, but we’ve done it in Teravista and Paloma Lake when badly run ductwork destroyed one. That’s a heat pump repair that starts with airflow diagnosis, not parts swapping.
Trusted Brands We Service in Round Rock
Our techs are factory-trained and field-experienced on nine major residential brands, including Carrier, Bryant, Daikin, and American Standard. That means the person who shows up at your Round Rock door knows your specific system, not just furnaces in general. We keep common parts in local stock for these brands, which shortens turnaround when something fails in cold weather. Whether you have a 1995 Trane 80% furnace in an older Forest Creek home or a 2022 Daikin heat pump in a new Teravista build, the tech we send has worked on that equipment before. We don’t tell you we’ll “figure it out when we get there.” We know what’s on the other side of the door.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Round Rock Homes
- Cracked heat exchangers in 1980s – 90s tract homes: Many original furnaces in Round Rock’s older neighborhoods were oversized for the home they heated. Short cycling from too much tonnage puts repeated thermal stress on the heat exchanger, and after 25 to 35 years, cracks appear. We find this pattern all over the areas west of I-35 and around Old Town.
- Blower motor failures from galvanized duct corrosion on the east side: Homes built in the 1960s and 1970s east of downtown Round Rock often still run original galvanized ductwork that corrodes from the inside due to Central Texas humidity. Restricted airflow makes the blower motor work harder than designed, wearing it out early and making the system noisy in the process.
- Tripped limit switches in newer master-planned homes: In Teravista, Paloma Lake, and similar developments, builder-installed flex duct sags in the attic heat and kinks over time. The restricted airflow causes limit switches to trip on cold winter mornings, leaving newer homes with no heat even though the furnace itself is fine.
- Ignitor failures at first cold snap: Every year, Round Rock’s first sustained freeze brings a wave of no-heat calls. The ignitor, which glows to light the burner, cracks from thermal shock or simply wears out after a decade. It’s a $150 – $280 fix, and we keep ignitors for all nine brands on our trucks so it’s usually fixed in one visit.
Pricing for Furnace Repair in Round Rock, TX
Here’s what furnace work actually costs in Round Rock right now:
| Service | Typical Round Rock Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
A $150 repair usually means a small part like an ignitor or flame sensor. A $700 job is something like a blower motor replacement or a gas valve on a higher-end unit. What moves the price is the part cost, how hard the furnace is to access (attic furnaces in older Round Rock homes take longer to work on than closet units in newer builds), and whether we’re diagnosing airflflow problems that other companies ignored. You’ll always see the written price before we pick up a tool, and it doesn’t change at the door. Call (361) 204-1605 for a free estimate.
We Also Serve Cities Near Round Rock
Our Furnace Repair team works throughout the Round Rock area and covers Pflugerville, Leander, Austin, and Manor as well. If you’re in a neighboring community and your furnace quits, the same written guarantee and same live-person phone coverage apply. Whether you’re off Highway 79 in Round Rock or just down the road in Pflugerville, we’ll get a tech to your door fast.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Round Rock
Homes in Round Rock built in the 1980s and 1990s often have furnaces sized by a quick square-footage estimate rather than a proper Manual J load calculation, and you can usually tell because the furnace short cycles (fires for a few minutes, shuts off, repeats), runs loudly, and some rooms never reach the thermostat temperature. A tech can measure static pressure and compare it against the blower performance chart to confirm the mismatch. If you suspect it, a tune-up with airflow testing is the place to start, and our techs are not paid on what they sell, so the recommendation you get is what the house actually needs. Call (361) 204-1605 and we’ll check it out.
In Round Rock’s newer master-planned developments, the most common reason for early furnace failure is builder-grade installation: undersized evaporator coils, restrictive return drops, and flex duct sagging in attics that hit 130°F in summer. Our techs saw a 2018 single-story in Teravista where the blower motor failed after three seasons because static pressure was nearly double the manufacturer’s design limit. We corrected the airflow and replaced the blower under warranty, but only after proving the install defect. If your newer furnace is failing, ask for airflow and static pressure testing, not just a parts swap. Call (361) 204-1605 and we’ll diagnose it properly.
Yes, and it matters more than most Round Rock homeowners realize. Many manufacturers offer a 10-year parts warranty only if the equipment is registered within 60 to 90 days of installation, and an unregistered unit drops to a base 5-year warranty. Some HVAC companies in the area leave warranty registration to the homeowner, and the paperwork gets missed. When we install or repair, we handle the registration and confirm it in writing as part of The Kingswell Way. If your furnace is newer and failing, we’ll check the registration status before recommending any paid work.
Because the ductwork was probably never replaced or resized. Many homes built east of downtown Round Rock in the 1960s and 1970s still run original galvanized ductwork that corrodes internally from decades of Central Texas humidity, restricting airflow no matter how good the new furnace is. A new blower motor pushing against restricted ducts will run hot, draw more amps, and fail early. The fix starts with a duct inspection and static pressure measurement, and it’s work we recommend before putting another motor in. Call (361) 204-1605 for an honest assessment.
A capacitor check takes about ten minutes and costs a small diagnostic fee if it’s the only thing done. A full furnace repair means we’ve identified a failed part, quoted you a written price to replace it, completed the work, and issued the 365-Day Done Right Promise in writing. Some Round Rock homeowners call us expecting a simple capacitor and we find a cracked heat exchanger instead. That’s the difference in value, and it’s why we never quote a price over the phone without looking at the system first. Call (361) 204-1605 and we’ll give you a straight answer and a written price before any work begins.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Austin, serving Round Rock since 2003.
Furnace acting up in Round Rock? Call (361) 204-1605 for a free estimate from the team that puts the price and the guarantee in writing.