Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Camp Swift
A full AC installation in Camp Swift typically runs $3,500 to $7,500 for a correctly sized system on a standard lot. That includes the outdoor condenser, indoor evaporator coil, line set, electrical connections, and a written price before any work begins. We serve every corner of Camp Swift, from the manufactured home communities off FM 20 to the newer tract streets north of 290. When your compressor gives out in July or you are building a new home and need a system sized right from day one, call (361) 204-1605 and a live person answers, day or night. We know what Camp Swift’s sandy soil and hard well water do to standard equipment, and we plan every installation around those realities instead of pretending they don’t exist.
Why Cold Harbour Heating and Air Austin Is Camp Swift’s Preferred AC Installation Company
We started doing AC work in 2003, and the technicians we send to Camp Swift are background-checked uniforms with names on the shirt. Homeowners here tell us the same thing: another company quoted a price over the phone, then bumped it at the door. That does not happen with us. The Kingswell Way means the written price is in your hand before a single tool comes out, and it doesn’t change when the work is done. Victor Mancini, who runs our operation, put it plainly when he built our standards: the guarantee goes on paper, not just on a handshake.
Because we operate as an independently owned member of the Kingswell network, we have the training infrastructure of a large outfit with the accountability of a local shop. Our technicians service nine major residential brands including Trane, Lennox, Rheem, and Goodman. When a Camp Swift homeowner calls at 2 a.m. because a package unit quit, the phone rings to a person. Not a voicemail tree.
Camp Swift’s specific mix of manufactured homes, aging tract builds, and new construction means our installers have seen every duct configuration you can name. We regularly correct undersized flex duct runs that were never right from day one. Our AC Installation team sizes systems by Manual J load calculation every time, not by guesswork or “what was there before.”
Styles & brands we work with
HVAC Installation in Camp Swift
HVAC Installation in Camp Swift means more than swapping a box outside. It means assessing what the hard water from shallow wells has already done to your evaporator coil, whether your duct leakage is eating 30% of the cooling you pay for, and whether the condenser will sit in a path of sandy soil blown from the post oak savannah. A new system only performs as well as the ductwork and airflow behind it, which is why we inspect static pressure and duct sizing on every install. Most full HVAC installations in Camp Swift land between $3,500 and $7,500 depending on tonnage, efficiency tier, and the condition of what’s already in the home.
Central Air Installation
For conventional ducted systems, we replace the full line set with every compressor change, which matters in Camp Swift because mineral deposits and heat cycling stress old copper. We also flush the existing evaporator or replace it entirely when scale is present. A matched indoor and outdoor unit is the only way to hit the SEER2 rating on the label.
Manufactured and Modular Home Work
Many Camp Swift homes are manufactured units with duct systems that were marginal on day one. We routinely find 10-inch flex duct where a 12 belongs, restrictive register boxes, and return air paths that starve the blower. Sizing a new system correctly for a manufactured home often means correcting the ductwork, not just replacing the unit. If you skip that step, the new AC short-cycles and the compressor dies early. We will not sell you a system that fights your house.
Heat Pump Installation in Camp Swift
Heat Pump Installation in Camp Swift gives you heating and cooling from one unit, which fits this area well because our winters are short but real. A heat pump handles the long cooling season efficiently and covers the brief cold snaps with electric heat strips as backup. In Camp Swift, most heat pump installations run $3,500 to $7,500 for a complete system depending on capacity and efficiency. The key local consideration is the outdoor unit’s exposure to fine sandy soil and mineral-laden air, which we address by recommending corrosion-resistant coated coils and placing the unit where drainage and airflow stay clear.
Cold Snap Performance
Camp Swift does not get Minnesota winters, but the occasional hard freeze stresses a heat pump. We size the auxiliary heat strips to handle the lowest temperatures this area actually sees, and we set the defrost cycle for the humidity that rolls in from the Gulf. A heat pump installed right heats a home through a Texas cold snap without burning through strip heat for weeks.
Manufactured Home Heat Pumps
A 3-ton Rheem heat pump we installed in a 1998 manufactured home off FM 20 tells the story. The old condenser coil was crusted with mineral scale from well water, and the blower was pulling 0.9 inches of static pressure because the flex duct was undersized. We corrected the duct leakage, set a proper refrigerant charge, and verified a 15.2 SEER2 rating with a calibrated thermostat. The homeowner’s July cooling bill dropped 31%. That is what proper sizing and airflow correction do.
Trusted Brands We Service in Camp Swift
Our technicians work on Trane, Lennox, Goodman, and Rheem equipment every week, along with the other five major brands we are trained on. For Camp Swift customers, we keep common parts for these brands on local shelves, which means fewer follow-up trips when a start capacitor fails or a control board acts up. If a part has to be ordered, we tell you the real timeline up front. We do not push one brand; we recommend what fits your home’s cooling load, duct condition, and your budget in writing.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Camp Swift Homes
- Sandy soil clogged condenser coils. Fine soil from the post oak savannah coats condenser coils by mid-summer, drives head pressure up, and kills compressors. We position outdoor units away from prevailing wind paths and recommend monthly coil washing during the hot months.
- Oversized tonnage on undersized ductwork. A 4-ton unit on ducts built for 2.5 tons short-cycles, freezes the evaporator, and breeds mold in the duct liner. We measure static pressure on every installation and correct the ductwork before the new system goes in.
- Hard water scale on evaporator coils. Shallow wells in Camp Swift deliver mineral-heavy water, and that scale accumulates on coils, reducing heat transfer and tripping high-limit switches. We recommend coils with wider fin spacing and anti-scale coatings for homes on well water.
- Leaky flex duct in manufactured homes. Duct leakage in older manufactured homes can exceed 30%, meaning a third of the cooling air never reaches the register. We seal and repair duct runs on every install in manufactured housing.
Pricing for AC Installation in Camp Swift, TX
Every installation starts with a site walk and a load calculation, not a flat phone quote. Here is what Camp Swift homeowners can expect:
| Service | Typical Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| Heat Pump Installation | $3,500 – $7,500 |
| Tune-Up (annual maintenance) | $80 – $200 |
The range depends on tonnage, efficiency tier, whether we are replacing just the condenser or the full split system, and the ductwork condition. A 14 SEER2 base system sits at the lower end; a high-efficiency heat pump with coated coils and corrected ductwork lands higher. Every quote is written. It does not change at the door. Call (361) 204-1605 for a free estimate and we will walk your home before we price anything.
We Also Serve Cities Near Camp Swift
Our crews cover the surrounding area including Austin, Round Rock, Pflugerville, and Leander. If you live in Camp Swift or nearby, the same written pricing and 365-day guarantee apply. Dispatch is coordinated from the Austin office, and a live person answers around the clock.
Serving Camp Swift, TX - Our Local Coverage Area
We’re based in the Camp Swift area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Camp Swift
Monthly during June, July, and August is the real answer for Camp Swift, because fine sandy soil from the post oak savannah coats coils fast and sends head pressure climbing. A quick garden-hose rinse with the power off, at low pressure, keeps airflow moving. Don’t use a pressure washer. It folds the fins. If the coil is heavily scaled from mineral-laden air too, we can add a coil cleaning to your spring tune-up for $80 to $200. Call (361) 204-1605 and we will show you exactly how to do it safely on your unit.
If your outdoor unit sits within sight of sandy, wind-blown soil or you water from a well, yes. A factory-applied epoxy or coastal-grade coating slows the corrosion and pitting that shortens a standard coil’s life around Camp Swift. The premium is modest compared to replacing a condenser five years early. Not every home needs it, but homes with heavy soil exposure or humidity from the Gulf side do. We can assess your lot during a free estimate.
Because the unit is bigger than the ductwork can breathe. Too much tonnage on undersized flex duct leads to frozen evaporator coils, mold in the duct liner, and a compressor that cycles on and off every few minutes. The fix is a Manual J load calculation first, then correcting the duct runs. A properly sized manufactured home unit runs longer, pulls more humidity out of Camp Swift’s hot air, and lasts years longer. Call us before the equipment gets ordered, not after.
Yes, when the auxiliary heat strips are sized for the real low temperatures we see, not a generic Texas average. Camp Swift’s humid air also means the outdoor coil will frost more often, so the defrost cycle needs to be set correctly. Our heat pump installations include cold-snap verification and a written guarantee on the entire system for 365 days. If anything fails in that window, we come back at no charge.
Minerals from shallow wells settle on the coil surface and act like insulation, cutting heat transfer and pushing your system to run harder and longer. Over time, that scale can also trip high-limit switches before a tech even checks the refrigerant charge. We recommend wider fin spacing and anti-scale coatings on evaporator coils for Camp Swift homes on well water. That is the detail that separates a five-year coil from a fifteen-year coil, and it costs less than most people expect. Want an exact quote? Call (361) 204-1605.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Austin.